!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Please Visit DIY Tool Supply for all your Tool Needs

18 April 2007

How to Build a Coat Closet - Framing

The next step to building a closet is the framing. Prior to this step you will want to buy a pre-hung door so that you know what the rough in dimensions are.

You are then going to cut a frame to fit in between the header and the footer every 16 inches on center. Remember, frames closer than 16" are ok, but frames further apart than 16" are not. I have used my extensive solid modeling skills to build the mock-up that you see below (glad to see that that almost $300,000 engineering education is not going to waste). Notice how the corners are double framed. Also notice, that the header to footer frames that the door will fit in-between are 3" wider than the rough in measurement. This is for good reason and I will show you why in the next post about framing the door.



Below: With footers

1 comment:

Charles E. Root Jr. said...

Ahhh so you do do double framing in the corners, Thanks for the tip. I'm building a closet in my basement and wasn't sure.